01

Step 1: Preparation

We ask all clients clear the space prior to the instal date. Our team will inspect the concrete for any cracks, holes, oil stains or other imperfections. We will start to repair the cracks and imperfections with a high strength epoxy filler or patching compound while grinding uneven surfaces. We will Degrease, clean and acid etch if needed.

02

Step 2: Priming

Priming helps seal the porous concrete and improves adhesion for your floor, this process takes 12-24 hours to cure.

03

Step 3: Applying the Base Coat

The base coat is where your design comes into play. We can mix any number of colors, waves, patterns, even stenciled graphics into your floor design. Our designer always uses a roller to smooth the surface and eliminate air bubbles. Any decorative finish, vinyl flakes, or other design elements will be added, This process can take 12-24 hours to cure. 

04

Step 4: Applying the Top Coat

The Top coat is where your custom design will be sealed in for good. Our team can also mix in an anti-slip additive if needed. After your top coat is applied and the design is complete, your new floor will take 24-72 hours to cure before heavy use. Ensure proper ventilation during this time to help with off-gassing.